郁闷了,700wx被我弄成砖头了(已经解决)

iamyanxy

只不过是进##786,然后点了左下角的option,选择了RTN RESET
然后开机就一直停在那个TREO的画面,下面的滚动条都出不来了.

请教各位,有什么办法吗?
3 W1 P# P4 P! I7 p
[ 本帖最后由 iamyanxy 于 2009-4-5 11:34 编辑 ]

iamyanxy

Zero Out Reset
1 z$ t5 c0 R  T; I4 [0 l
; x0 y, H" ~5 t, WThe Zero out reset applies only to devices with non-volitale RAM (i.e. the Treo 650 and Treo 700p or Treo 700w/wx). It is designed to overwrite all of your data with random data to help protect it should you sell your Treo. Be absolutely positive your data is backed up before attempting this as it will be impossible to recover anything from the phone afterwards.

1. connect your Treo to the Hotysnc cable. Make sure the Treo is fully charged.
) ^# x3 Z, P) k5 x: _, b5 m
2. Press the power button while holding down "Up" on the 5-way and press the Hotsync button on the hotsync cable.
& ]6 @( P8 C# {. ^" C6 R
* v6 B" ~# k( a/ @0 w4 D! v5 U3. While holding down those three buttons, press the Reset button. Yes - this is going to ve very awkward, but Palm has done that intentionally.
  X+ V8 n8 ?+ q6 n$ R
4. Your Treo will appear to be dead for several minuts - possibly up to 15 minutes. After it reboots your data should be entirely erased.

iamyanxy

我靠,太狠了,这都行,原来RTN RESET就相当于是做了一个ZERO RESET
& Z; j  m9 S8 f
比XX硬启还彻底,我的机器放着不动,过了五分钟~十分钟,自已会重启的,太猛了,又学到一招

KING

。。。。。RTN Reset就是相当于硬启的。。。

iamyanxy

谢谢老K,
! g2 z  a3 v, U不过硬启就象是按着挂机键后捅PP,然后提示向上删除所有资料吧,这个我以前做过,蛮快的,不象这次这样,就是开机一个treo的图样,然后下面的进度条都没有,象是死机了一样,我还反反复复重启了好几次,最后看了老外的帖子,把它扔那不管,过了几分钟才发现自己重启进入系统了
. W+ g9 `2 E7 ^, q8 V
) o7 R" \: X8 I3 ?btw:除了AKEY和ESN没变过,其他全变掉了,要重新写一遍才行.
; d1 _/ Y9 K9 |7 a: G
[ 本帖最后由 iamyanxy 于 2009-4-5 14:10 编辑 ]

KING

呵呵，RTNReset的结果就是清除模块里面的一些数据，然后硬启的。所以比单纯硬启要慢一些。

bluegatar

原帖由 KING 于 2009-4-5 13:46 发表
。。。。。RTN Reset就是相当于硬启的。。。

不正确啊，rtn reset会删除firmware中的设置，而硬起不会！！！

johnsoncui

我的一开始也跟楼主状况一样，停在treo界面不动。
后来我又拿wm5的rom连刷了两次,结果现在黑屏连开机都开不了。
这个要怎么解决