重新格式化zune

CyberVsQ

据说格了会有问题，大家别随便格

This solution helps with firmware errors, messed up libraries, and many other zune malfunctions.

This solution completely reformats your zune, and erases it's firmware.

First you must restart your zune. To do you you have to hold the back, and up button at the same time for at least three seconds (3).
同时按着后退和上键3秒

While your zune is restarting, you must press and hold back, left, and the middle buttons down simultaneously. Do this while the zune is restarting (not after).
当zune重启时,一定要按着后退/左和中间键,一直等到机器重启

To my knowledge it doesn't matter if the zune is plugged into a power source, as long as the software isn't running.
是否插电源无关.

Before you do this it is important to know that your computer can find, and sync with your zune. If it can not sync, then you will not be able to install the firmware.

确定这个时候电脑可以识别到zune,否则没办法重刷FW

Ok... now that you've held down back middle and left, while the zune was restarting you should get on-screen instructions on how to finish the reformatting process.
按下来,同时按着后退/中间和左键..zune重启并在屏幕上显示重新格式化的进度

http://forum.darkzune.com

zune

全是英文，看不懂啊！