Lightspeed 2.0


Introduction

Lightspeed lets you change the CPU clock frequency of your Palm OS 5 device.

- Overclock and increase Performance!
- Underclock and increase Battery Life!

These settings can be changed individually for each software application.

For processor intensive applications - such as Games, Emulators, Image Viewers, Movie Players, Database applications, Map Viewers, 3D Graphic Renderers etcetera - the CPU clock can be set as high as possible to maximize the system performance and user experience.

For less processor intensive applications - such as PIM applications, Launchers, Ebook readers etcetera - the CPU clock can be set as low as possible to maximize the battery life!

The different CPU clock settings have been tested thoroughly with each of the supported devices. The possible settings in Lightspeed are the ones that have been found very stable during testing and are somewhat different depending which of the supported devices Lightspeed is used with.

Requirements

Lightspeed supports virtually all Palm OS 5 devices. Clocking support exists for multiple processor types - Intel XScale, Texas Instruments OMAP, i.MX1/i.MXL and Samsung processors. For a complete list of supported devices visit the FAQ section at www.clievideo.com.

Getting started

Install Lightspeed.prc to your Palm OS device. Lightspeed should be installed to internal RAM, it can not be run directly off an external memory card.
Launch Lightspeed, change the settings for your applications, check the "Enable" checkbox and run your applications at their new speed settings!

User Instructions

Lightspeed lets you set processor clock settings individually for each application in internal RAM and also for applications that are run off an external memory card.

When an appplication is being launched, the CPU are set to the clock values the user has chosen for this particular application.

The values for each app can be set individually, all application can be changed to the same value at the same time or a selected group of applications can be changed at the same time.

Choose between Multiple/Single to change either multiple applications or a single application at one time. When an app is selected click on Change to change the settings for this applications, or tap on the application name in the table to do this.

A "High" setting and a "Low" setting can be set for quicker changing to often used settings.

There is an Enabled/Disabled button. Click on it to switch between Enabled/Disabled Modes. When Lightspeed is Enabled it will change the clock settings when apps are launched and when it is Disabled it will not.

In the Preferences screen one can choose whether or not to manually enable Lightspeed when the device boots and whether or not to show the intro splash screen when Lightspeed launches.

For devices which has an OMAP CPU there is also an option to reduce the annoying high pitch screen noise which some devices emit.

The Preferences screen are accessed via the menu inside Lightspeed. The menu is accessed by either tapping on the Menu Silk Screen button in the Silk Screen Area or by tapping a dedicated Menu button on devices which has a keyboard.

Registration

Lightspeed can be used without registering during a trial period of 14 days.

After the trial period is over a registration code is needed for further usage of Lightspeed. Get your registration code from www.clievideo.com

For more information, support and FAQs visit our site www.clievideo.com.