一步一步修改webos内核，打造属于自己的webos

xkaron001

参考：http://predev.wikidot.com/rooting
# n8 [! X3 a, F6 n+ ^* w9 X" Bwebos内核下载地址：
http://palm.cdnetworks.net/rom/p ... orp100ewwsprint.jar
" e& i3 o5 B# ?请用下载工具


' P5 M/ k3 i( D7 a, }8 \- KEnable Root Access
The pre has been rooted.It is actually a fairly simple rooting procedure. Look below.
: S& S3 X9 a2 X4 S: yRooted Pre
Rooting a Pre
5 A! u" F1 z$ BProcedure:Windows:

• Download the WebOS image
• Rename this file to .zip, and extract it
• set the Konami code on your pre (upupdowndownleftrightleftrightbastart), and put it into dev mode. Plug it into your windows laptop after it's booted
• Run the driver installer from the extracted file, it is: webosdoctorp100ewwsprint/resources/NovacomInstaller_x86.msi
• Install Python 2.6
• Get the rooter from subversion: http://svn.saurik.com/repos/webos-dev/trunk/rooter/
• Run talk.py inside of the rooter in subversion, it'll output a bunch of lines. If you see an error, join the irc (irc.freenode.net #webos-internals)
• Turn on the wifi on your pre. Get your pre's IP address, and you can telnet into it (username: root)
• Secure the network access once finished. See Securing the network

Mac OS X:

• Download the WebOS image
• Rename this file to .zip, and extract it
• untar resources/NovacomInstaller.pkg.tar.gz (tar -xzvf)
• run NovacomInstaller.pkg
• click through the installer
• put your Pre in dev mode following instructions above
• connect to your mac via USB cable ( no need to select a mode, doesn't seem to matter )
• cd /opt/nova/bin
• ./novaterm
• At this point you should have root

Once you've done this, you can add a permanent backdoor by following the instructions on the wiki backdoor and then you can disable developer mode, but still have access to the Pre over the wifi link
. D1 w$ J% C2 H  nroot@castle:/# lsbin         dev         etc         lib         md5sums     mnt sbin        tmp         varboot        dspbridge   home        lost+found  media       proc sys         usrroot@castle:/# uname -aLinux castle 2.6.24-palm-joplin-3430 #1 175.1.15 armv7l unknownroot@castle:/# whoamiroot
Credit to Sargun for python script

4 b6 l9 {! v4 B" L3 w- S  x[ 本帖最后由 xkaron001 于 2009-6-11 09:34 编辑 ]

xkaron001

请系统爱好者一起玩玩，做出一个属于自己的webos

6 O4 F+ l8 H# u* t9 \9 G3 j" T3 w只不过palm pre的硬件还不够好，所以，呵呵，仅仅当p3机器实用一下吧。

ohyeah

哈哈，完全可以diy...

prowesslyll

p3.哈哈，比p3的机器贵

osagem

估计我能买到webos的时候,webos已经遍地开花了,实在是好啊

zxy6350479

恩  呵呵 我想也是。。。。

notell

待到山花烂漫时，它在众中笑。

jjxxin

原帖由 notell 于 2009-6-12 00:11 发表
+ Y* I- ?6 e: @1 ?5 y; M0 u6 b: y待到山花烂漫时，它在众中笑。

& B; b: l: K# S! _9 R6 H! M

2b6c3d729918489

大家找一些熟悉linux的朋友推荐过来...一起来发掘

发条狐狸

太好玩了.呵呵

caiheng

upupdowndownleftrightleftrightbastart
4 A- s* {, `4 H4 ~/ a; J  w& l
& Z' H- p. y' p2 k/ s6 @
上上下下左右左右BA开始？？？

* x4 J4 z+ z3 k+ d9 O) J2 Kpalm的工程师太搞笑了哈~~~