[旧资料]Set Up TurboSIM Using Just The iPhone (AppleSaft)

寂夜清风

这里是一些早期的资料.先放着备用
: n' t& F1 k# E4 ]
) x9 h( V' B# o8 S

Note:

• TurboSIM will work with any SIM (v1/v2/v3/2G/3G/whatever)
• If during the process you get an "AT+CPMS" error, there's a veryhigh chance it's due to loose contact between the TurboSIM andwhichever SIM it's piggybacking. Remove the SIM combination from youriPhone, nudge it a little to make sure they fit, and replace in theiPhone.
• The difference between the ISA and AppleSaftmethods is that ISA allows you to set up TurboSIM without the need tocut up your AT&T SIM, but is more complicated than using AppleSaft

Disclaimer: I am not responsible for anything that happens to your iPhone (or any other stuff for that matter)

( V8 v4 [. q- I! o5 ^) \% ELets begin. First, you need to make sure of a few things:

• iPhone with Windows
  • Jailbreak
  • Enable SSH and using WinSCP (SFTP)
  • iPhone activated using your own AT&T SIM's token (DVD Jon's PhoneActSrv will not work!)
    , u& z4 H) j; b( t5 i- r        (eg. iASign method using AT&T's ICCID, or activating with AT&T legitimately)
• iPhone with OS X
  • Jailbreak and activate using iActivator (skip iActivator steps if already activated with AT&T legitimately)
  • Enable SSH
  • Using SFTP
• You have a 4GB/8GB iPhone from Apple
• You have the Turbo SIM - Blank Version available from Bladox or Votech

$ k$ I. L; o4 P) C+ r0 ?/ o/ ~Once you have done all that, you can begin with the TurboSIM installation process:

• Connect to your iPhone via SSH
  2 l; O0 e0 w+ g- {+ g" B- B(I'm using SFTP in my example)
• Download turbo-cable-utils-iPhone-0.7.0-rev1.tar.gz
  (much thanks to Zf_ who ported the binaries for iPhone)
• Unzip it, and place the entire content of the folder bin-iPhone into the iPhone's /bin directory.
  (You can remove the bins after you're done if you want. Ignore the folder patch.)
• Give executable permission to these files. Chmod +x <filename>, or chmod permission to 0755 if you're using a client like WinSCP
• Download applesaft-0.92.tar.gz (this is the AppleSaft app for TurboSIM)
• Unzip it, go to the bin folder in the file you've just unzipped, and you will find the file applesaft.trb
• Copy applesaft.trb into your iPhone's home directory (/private/var/root)
• Disable CommCenter on your iPhone:
  • Download and/or open the file /System/Library/LaunchDaemons/com.apple.CommCenter.plist on your iPhone
  • Add <key>Disabled</key><true/> just above the text </dict> on the second last line
    0 H9 U7 ?' n1 E* ^        (last line being </plist>)
  • Save file and/or upload it back
• Restart iPhone

Now we've got all the software part settled, lets move on to some hardware fixing:

• Cut up the your own SIM card (the one you wish to use with theiPhone) until it fits the TurboSIM nicely. It is ok to cut a tiny bitmore so that they'll fit nicely.
• Repeat the above process with AT&T's SIM card
• Insert the AT&T-TurboSIM combination very gently into the iPhone.
  3 B- z# V+ @! F5 |: u* [# dBe extra careful! The TurboSIM is notoriously brittle, and will crack if you use too much force!
• Open up an SSH command terminal and enter the following command: turbo-info
• You should see a summary and OK
• Next, enter the following command: turbo-app /private/var/root/applesaft.trb
• You should see a reply with OK
• Enable CommCenter on your iPhone:
  • Download and/or open the file /System/Library/LaunchDaemons/com.apple.CommCenter.plist on your iPhone
  • Remove the text <key>Disabled</key><true/> you have added previously
  • Save file and/or upload it back
• Restart iPhone

( v4 R% u2 A% ]8 B  m7 Y( A
( ]$ r4 i( n7 m8 B; }
' h" ]3 [' g6 ~; O, c1 P$ PNow we've finally gotten the difficult parts away! The rest should be easy:

• Go to your iPhone Settings menu > Phone. You will now see a new option SIM Applications
• Select it, then select Apple Saft, and then Set
• Remove the AT&T-TurboSIM combination (gently), and insert your own SIM-TurboSIM combination (again, gently)
• Restart iPhone
• Congratulations! If you've done everything correctly, it works now!
• To enable EDGE on your iPhone now:
  • Go to your iPhone Settings menu > General. You will now see a new setting for EDGE
  • Enter your carriers APN and/or username and password (consult your carrier if unsure)
• Important: It is possible for Apple to upgrade the iPhone'sradio firmware and fix this TurboSIM "method". Do not update youriPhone's firmware until you're sure the update does not include the fix.

This tutorial will not be possible without the precious help from deFa, toonces and Zf.
Screenshots courtesy of toonces.
Do drop by our IRC channel at #iPhone-TurboSIM and tell us if it works for you!

http://iphone.simbunch.com/turbosim.php

寂夜清风

之所以收集这个资料.是因为看到这个贴子里提到

6 F  j+ q( _+ H3 u/ B

Seriously people it's really not that hard, I don't understand why youdon't just do an attempt to find some information here on the forum,before you start posting retarded threads/replies with questions peoplahave already answered several times.
: w7 s* ]6 V1 r" A0 X4 N0 ^
6 |2 n5 K: I  n2 EVery nice video dave, I love your setup, but I have no idea how you're able to manage such patience with people.

( e  a! a# G! A: N0 p" QAll you've got to do to make this work is order a TurboSIM and follow this guide:
$ B4 J4 U1 d# @% {1 R; }' h
" k+ r8 ~/ [: I/ ]http://iphone.simbunch.com/turbosim.php ( remember to use this version of applesaft: http://dl.free.fr/idiUgBjyj/applesaf...loitable-3.zip )

And you'll be totally fine with any regular simcard! .. Keep in mindthat the TurboSIM is rather brittle, you'd want to handle it with care!
, N- r6 D( D$ L/ F$ y: c
- rasmusth

3 @: @8 G: z; P" w6 m) M
# `& [. n& P5 Chttp://www.hackint0sh.org/forum/showpost.php?p=128164&postcount=59