通过WidComm驱动与680蓝牙连接的一点经验

tigervane

好像很多人都用的IVT，我这个联想YT810的适配器用IVT就只能找到两个服务，连文件传输都没戏，IVT查看服务属性还挺容易锁死无响应，只好放弃改用WidComm -- 我用的是5.0.1.3100，更新的没试过，这个能用就不去追新了，免得xx不成功还麻烦

1、使用WidComm驱动时，Activesync可能会占用端口，确认是否已将其关闭或在WidComm管理器中删除。
/ \0 c: ?; V+ l
2、Palm用蓝牙连结PC宽带上网，softickPPP比手动设置好用得多，注意在WidComm->高级设置->本地服务中，添加串行服务；并且softickPPP与Hotsync二者只能运行一个。

- q$ W8 L- ?2 F3 A7 `3、PC用蓝牙连结Palm作猫上网，PDANet就能搞定，不过也是需要使用跟Hotsync一样的串行端口。如果遇到773错误，可以用Hotsync试着与Palm同步一下，能进入Identify就可以中止切换会PDANet（不用理会报错），一般这样就可以了。softickPPP遇到端口拒绝访问时也可以类似操作。从这里来的：
2 \) |- p) ]$ G$ C6 l
- O2 n9 n# `' g1 \( u( Y# VI am getting error code=773 on the phone over a Bluetooth connection. I have make sure Bluetooth is working for HotSync.
3 V4 y5 G5 @; T1 @+ p$ q
( S" @, s& w+ H' ^We have seen this error reported from a few users. Try the following and see if it helps: first disable Bluetooth in PdaNet settings and enable it in HotSync, then perform HotSync over the same Bluetooth serial port and make sure it works. Now without disabling it from HotSync Manager, go straight to PdaNet settings and enable Bluetooth on the same port. You will see a warning message, just let it continue. Try to connect PdaNet over Bluetooth again and see if the problem goes away. If not, stay with USB since there might be a compatible problem between PdaNet and the Bluetooth driver/adapter on the computer end. This is rare but we have seen it.



; p% t7 l8 G* c. w7 h8 }4、CardReader1.8可以通过蓝牙让PC读取Palm上的SD卡（在我的蓝牙位置中建立一个虚拟ftp目录），但此后直接从PC发送文件到Palm将不可用，必须断开CardReader，并且删除虚拟的ftp目录。